Chisel types for HYCON Breakers
HYCON Have several types of chisels for different tasks. Here, you can get an overview of what each type is used for so you can choose the right chisel for your breaker.
1. Moil point chisel
A pointed chisel that concentrates impact into a small area for maximum penetration. Used for starting breaks in concrete, breaking boulders/rock, and breaking down hard materials.
2. Narrow chisel
A general-purpose flat chisel for breaking and splitting hard materials. Used for concrete demolition, removing slabs, trimming edges, breaking up frozen ground, and light rock work where a broad cutting face helps “slice” and separate material.
3. 50 mm wide chisel
A narrow flat chisel (50 mm) for controlled breaking with better access than wider asphalt tools. Used for cutting narrow trenches, working close to walls/kerbs/edges, removing tiles or thin concrete sections, and precise slab work where you want a clean, guided break line.
4 & 5. Asphalt chisel (3" and 5")
A wide, flat tool designed for cutting and lifting asphalt surfaces. It's used for road repair, trench cutting, patch removal, and stripping worn asphalt layers. The 3" version is a good all-round size for controlled breaking, while the 5" version covers more width for faster removal of material.
6. Tamper
A flat-faced compaction tool that transfers impact into the surface for packing rather than breaking. Used for compacting soil, gravel, and backfill in trenches, improving base preparation, and settling material around posts, foundations, or repair areas.
7. Tie tamper
A compaction tool shaped for working around railway ties and confined ballast areas. Used for packing ballast and aggregate tightly around sleepers/ties and along edges where a normal tamper is less effective due to access and shape.
Type 1 (Moil point) 19x50 mm hex [Article no.]
4010500
Type 1 (Moil point) 22x82 mm hex [Article no.]
4010510
Type 1 (Moil point) 25x108 mm hex [Article no.]
4010520
Type 1 (Moil point) 32x160 mm hex [Article no.]
4010530
Type 2 (Narrow chisel) 19x50 mm hex [Article No.]
4010501
Type 2 (Narrow chisel) 22x82 mm hex [Article No.]
4010511
Type 2 (Narrow chisel) 25x108 mm hex [Article No.]
4010521
Type 2 (Narrow chisel) 32x160 mm hex [Article No.]
4010531
Type 3 ( Wide 50mm chisel) 19x50 mm hex [Article No.]
4010502
Type 4 (3" asphalt chisel) 22x82 mm hex [Article No.]
4010512
Type 4 (3" asphalt chisel) 25x108 mm hex [Article No.]
4010522
Type 4 (3" asphalt chisel) 32x160 mm hex [Article No.]
4010532
Type 5 (5" asphalt chisel) 22x82 mm hex [Article No.]
4010513
Type 5 (5" asphalt chisel) 25x108 mm hex [Article No.]
4010523
Type 5 (5" asphalt chisel) 32x160 mm hex [Article No.]
4010533
Type 6 (Tamper base) Ø125mm [Article No.]
4010542
Type 6 (Tamper rod) 25x108 mm hex [Article No.]
4010525
Type 6 (Tamper rod) 32x160 mm hex [Article No.]
4010535
Type 7 (Tie tamper) 25x108 mm hex [Article no.]
4010528